Tire size calculator
Compare two tire sizes (e.g. 225/45R17) and see the speedometer effect.
About this tool
Compare two tire sizes side by side: overall diameter, width, sidewall height, circumference and the speedometer error from changing sizes.
How tire size numbers work
A tire size such as 225/45R17 has three parts. 225 is the section width in millimetres, 45 is the aspect ratio (the sidewall height as a percentage of the width) and 17 is the wheel diameter in inches. The "R" means radial construction.
The overall diameter is the wheel diameter plus two sidewalls: diameter = 2 × width × aspect ÷ 100 + wheel diameter × 25.4 (in mm). The calculator uses this to compare two sizes. The result matters because the tire diameter sets your speedometer accuracy, your effective gearing and how much clearance you have in the wheel well.
Worked example: 225/45R17 to 245/40R18
Moving up one wheel size while lowering the profile is called plus sizing. The goal is to keep the overall diameter close to the original.
| 225/45R17 | 245/40R18 | |
|---|---|---|
| Sidewall height | 101.3 mm | 98.0 mm |
| Overall diameter | 634.3 mm | 653.2 mm |
The new tire is 18.9 mm taller, a difference of +3.0%. At a true 60 mph the speedometer would read about 58.3 mph. That is under the 3-4% change most shops treat as the practical limit, but it is close, so check clearance at full steering lock and over bumps.
For comparison, 235/45R17 on the same wheel is only +1.4% taller (643.3 mm). A change of 1-2% is usually unnoticeable.
What to check before you buy
- Overall diameter: try to stay within about 3% of the original. Beyond that, the speedometer, odometer, ABS and traction control readings drift.
- Width and rim fit: every tire has an approved rim width range. A 245 tire typically fits rims from about 7.5 to 9 inches wide, but check the manufacturer chart.
- Load index: the replacement must carry at least the load index of the original. Never go lower.
- Speed rating: match or exceed the original rating.
- Clearance: a wider tire can rub on the inner fender, strut or suspension arms, especially with wheel offset changes.
Frequently asked questions
How do I read a tire size like 225/45R17?
225 is the section width in mm, 45 is the sidewall height as a percentage of the width, R means radial, and 17 is the wheel diameter in inches.
How much does a bigger tire change my speedometer?
The speedometer reads low by the percentage the new diameter is larger. A tire 3% taller means you travel about 3% faster than indicated.
How much can I change tire diameter before it causes problems?
Most mechanics recommend staying within about 3% of the original overall diameter. Larger changes make the speedometer and odometer inaccurate, can confuse ABS, stability control and transmission shift logic, and raise the risk of rubbing.
Does a wider tire change my speedometer?
Not by itself. Speedometer error comes from the overall diameter. Two tires of different widths can have the same diameter, though a wider tire with the same aspect ratio will also be taller because the sidewall grows with width.
What does the R in 225/45R17 mean?
R stands for radial construction, which is how nearly all modern car and light truck tires are built. A letter before the size, such as P (passenger) or LT (light truck), describes the intended use.
What is the aspect ratio?
It is the sidewall height expressed as a percentage of the tire width. A 225/45 tire has a sidewall that is 45% of 225 mm, or about 101 mm tall. A lower number means a shorter, stiffer sidewall.
Can I put different sized tires on the front and rear?
Staggered sizes are used on some performance cars, but they must be designed for the vehicle. On all-wheel-drive cars, tires of different diameters can strain the drivetrain, so keep all four within the maker's tolerance.