Advertisement

Wheel offset calculator: backspacing and fitment visualizer

Compare your current wheel and tire with a new one. See how diameter, width, offset or backspacing change the position of the wheel and tire, with a top view and a side view.

Current wheel and tire

New wheel and tire

Clearance with your current setup (optional)

A spacer moves the wheel outward from the hub, so it lowers the effective offset by its thickness. Use hub-centric spacers with longer studs or bolts, and thread the nuts on fully. Estimates for a general check. Wheel width is measured between the bead seats, and the overall width is taken as about 1 inch more for the lips. Real clearance also depends on fender shape, brake caliper size, spoke design, suspension travel, steering lock and ride height, so test fit before you buy. Measure your gaps with the wheel at full turn and at full compression.

About this tool

Compare your current wheel and tire with a new one. See how diameter, width, offset or backspacing move the wheel and tire, with a top view and a side view and a check against your fender and suspension gaps.

Offset, backspacing and width explained

Offset (ET) is the distance in millimetres from the wheel's centreline to its mounting face. A positive offset pushes the wheel toward the car, a negative offset pushes it outward. Backspacing is the distance from the mounting face to the inner lip of the wheel, usually in inches. Width is measured between the bead seats.

They are related by: backspacing (in) = width ÷ 2 + offset (mm) ÷ 25.4.

Worked example: 9 in ET+35 to 10 in ET+20

9 × 18, ET+3510 × 18, ET+20
Backspacing5.88 in5.79 in
Outboard of mounting face3.12 in4.21 in

The wheel moves outward by about 1.09 in on the outside, while the inside moves out by only 0.09 in. This is why wider wheels with lower offset fill the fender but can rub on the fender lip, even if the inside clearance is similar.

How to choose a wheel offset

Advertisement

Frequently asked questions

What is wheel offset?

The distance in millimeters from the wheel's centerline to its mounting face. Positive offset tucks the wheel in, and lower or negative offset pushes it out.

How does a wheel spacer change fitment?

A spacer moves the wheel outward by its thickness, so a 20 mm spacer on a +35 mm offset wheel gives an effective offset of +15 mm. Use hub-centric spacers and longer studs or bolts.

How do I convert backspacing to offset?

Offset in mm = (backspacing in inches − half the overall wheel width in inches) × 25.4. Overall width is about 1 inch more than the nominal wheel width.

What is wheel offset?

It is the distance from the wheel's mounting surface to its centreline, in millimetres. Positive offset tucks the wheel in, negative pushes it out.

What is the difference between offset and backspacing?

Offset is measured from the centreline, backspacing from the back edge of the wheel. Both describe where the mounting face sits relative to the wheel.

How much does 10 mm of offset change?

Lowering the offset by 10 mm moves the whole wheel 10 mm (about 0.39 in) outward, so both the inner and outer edges shift by that amount.

Do wheel spacers make a wheel go out?

Yes. A 15 mm spacer acts like lowering the offset by 15 mm. Use hub-centric spacers and check the wheel studs have enough thread engagement.

Will a wider wheel rub?

It can, on the fender lip or on suspension parts on the inside. Measure both sides before ordering.

More in Tire Size, Tire Pressure & Wheel Offset Calculators

Other calculators

Advertisement